• 网站首页
  • 期刊介绍
    期刊简介
    编委会
  • 投稿指南
  • 过刊浏览
  • 在线订阅
  • 留言板
  • 联系我们
  • 网络预出版
  • English
引用本文:
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4266次   下载 8881次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
字体:加大+|默认|缩小-
雪峰山中段古生代变形的特征及意义——以绥宁-靖州-天柱-新晃剖面为例
张 进1,马宗晋1,陈必河2,王宗秀3,李 涛11,2,3
1. 中国地震局地质研究所,北京 100029;2. 湖南省地质调查院,湖南 湘潭 411100;3. 中国地质科学院地质力学研究所,北京 100081
摘要:
对雪峰山中段绥宁-靖州(会同)-天柱-新晃剖面的研究表明,雪峰山中段的变形自东向西减弱,由东部的向西倒转紧闭褶皱过渡到西部的开阔褶皱。东部(绥宁-靖州段)卷入褶皱的为南华系和震旦系—下古生界,褶皱样式表明东部在南华系与板溪群之间存在一区域性的滑脱面,本段缩短11km。剖面西段(靖州(会同)-天柱-新晃段)卷入变形的为板溪群、南华系和震旦系—下古生界,主要滑脱面位于板溪群下部或冷家溪群与板溪群之间,该段缩短46km。东西2段之间的界线是早期控制板溪群和南华系沉积的正断层。研究得出的缩短量为最小值,与前人的研究结果一致,表明古生代雪峰山逆冲推覆距离不大。雪峰山中段石炭系与南华系之间的超覆不整合、靖州盆地的构造属性和雪峰山剖面的变形特征显示,雪峰山中段的变形发生在早古生代。雪峰山早古生代变形是早期裂谷的反转,属薄皮构造。
关键词:  雪峰山  早古生代  缩短量  构造属性
DOI:
分类号:
基金项目:
Paleozoic deformational characteristics of the central Xuefeng Mt. and implication—A case study on the Suining-Jingzhou-Tianzhu-Xinhuang section, China
ZHANG Jin1, MA Zong-jin1, CHEN Bi-he2, WANG Zong-xiu3, LI Tao11,2,3
1. Institute of Geology,China Seismological Administration,Beijing,100029,China;2. Hunan Institute of Geological Survey,Xiangtan 411100,Hunan, China;3. Institute of Geomechanism,Chinese Academy of Geological Sciences,Beijing,100081,China
Abstract:
The Suining-Jingzhou (Huitong)-Tianzhu-Xinhuang section of the central Mt.Xuefeng shows that the deformation of the central Mt.Xuefeng gets weaker from the east to the west, i.e. from the west-vergencing tight folds in the east to the open folds in the west. The deformation has affected the Nanhuan System and Sinian System-Lower Paleozoic strata in the eastern section (Suining-Jingzhou), and the style of folds indicates that there is a regional decollement between the Nanhuan System and the Banxi Group in the east. The shortening of the eastern section is about 11km. The deformation has affected the Banxi Group, Nanhua System and Lower Paleozoic strata in the western section (Jingzhou-Tianzhu-Xinhuang), the regional decollement mainly occurred in the lower part of the Banxi Group or between the Banxi Group and Lengjiaxi Group. The shortening of the western section is about 46km. The boundary between the western and the eastern sections is the normal fault controlling the early depositing of the Banxi Group and the Nanhuan System. This study has obtained the minimum shortening distance across the central Mt.Xuefeng, which is similar to previous data. This means that no large scale thrusting had ever occurred in the Mt.Xuefeng during the Paleozoic.The facts of the overlap unconformity between the Carboniferous and penetratively deformed Nanhuan Systems in the central Mt.Xuefeng, the tectonic attribute of the Jingzhou basin, and deformational style along the section indicated that the deformation of the Proterozoic and Lower Paleozoic strata in the central Mt.Xuefeng took place in Early Paleozoic. The Paleozoic deformation in the Mt.Xuefeng was the result of the inversion of the early rift, which belongs to thin-skinned structure.
Key words:  Mt.Xuefeng  Early Paleozoic  shortening distance  tectonic attribute
您是本站第  5651328  位访问者!
版权所有:地质通报
主办单位:    
地址:北京市西城区阜外大街45号中国地质调查局发展研究中心    邮政编码:100037
电话:010-58584206;010-58584208   电子邮箱:dzhtb@263.net
技术支持:北京勤云科技发展有限公司