加入收藏 设为首页 联系我们
网站首页 | 期刊介绍 | 投稿指南 | 过刊浏览 | 在线订阅 | 留言板 | 联系我们
阮传侠,沈健,李立亮,刘荣光,牟双喜.天津市滨海新区东丽湖地区基岩热储回灌研究[J].地质通报,2017,(8):1439-1449.
天津市滨海新区东丽湖地区基岩热储回灌研究    点此下载全文
阮传侠1  2  沈健2  李立亮2  刘荣光2  牟双喜2
1. 中国地质大学(北京)
水资源环境学院, 北京 100083;
2. 天津地热勘查开发设计院, 天津 300250
基金项目:天津市国土资源和房屋管理局项目《天津市滨海新区东丽湖地区基岩热储保护工程》(编号:国土房任[2010]12号)和国家自然科学基金项目《天津地区地热田热储压力分析及研究意义》(批准号:41502256)
DOI:
摘要:
      天津市滨海新区东丽湖地区雾迷山组热储层为该区主要开发利用热储层,共有11眼地热井,由于集中开发利用,静水位埋深以每年3m速度下降。为了缓解水位下降,目前利用地热流体尾水进行回灌,水位埋深下降仍然较快。东丽湖地区有丰富的地表水水源,为增加回灌量,在丰水期利用处理后的湖水开展集中回灌,建成集中回灌系统。为研究集中回灌后研究区的动力场和温度场特征,在本区开凿1眼回灌井,进行回灌试验,确定该井的最大回灌率为152m3/h。建立研究区的数值模型,模拟供暖季和非供暖季2种回灌方式下的动力场和温度场特征。供暖季回灌量为30×104m3/a,平均到供暖季120d,回灌水温20℃,自然回灌方式;非供暖季采用湖水回灌,回灌量为40×104m3/a,平均到丰水期120d,回灌水温20℃,自然回灌方式。在无湖水回灌和有湖水回灌条件下,预测1a和5a后研究区的动力场和温度场特征,结果表明,增加湖水回灌可减缓热储层压力下降速率,对温度场不会产生明显影响。
关键词:天津  地热资源  回灌  模拟和预测
Researches on the reinjection of Dongli Lake bedrock reservoir in Binhai New Area, Tianjin    Download Fulltext
RUAN Chuanxia1  2  SHEN Jian2  LI Liliang2  LIU Rongguang2  MOU Shuangxi2
1. School of Water Resources and Environment, China University of Geosciences, Beijing 100083, China;
2. Tianjin Geothermal Exploration and Development Designing Institute, Tianjin 300250, China
Fund Project:
Abstract:
      The Wumishan Formation is the main development and utilization reservoir in the Donglihu district of Binhai New Ar-ea, Tianjin. There are 11 geothermal wells, and static level falls by the depth of 3m annaully due to the concentrated development and utilization. For the purpose of alleviating water level falling, geothermal fluid waste water has been used for reinjection; never-theless, the falling of the water level remains relatively fast. The Dongli Lake area is rich in surface water, the treated lake water is used for reinjection to increase the amount of reinjection in rich water period, and the concentrated reinjection system has been built in this area. A reinjection well was digged to carry out reinjection test and the largest reinjection of the well is 152m3/h. TOUGH2.0 software is adopted to establish the numerical model in the study area and simulate dynamic field and temperature field characteristics of two kinds of reinjection mode under the condition of the heating period and non-heating period. Reinjection rate is 30×104m3/a in the heating period averagely for 120 days, the reinjection water temperature is 20℃ and the natural reinjection modde is adopted. The reinjection rate is 40×104m3/a in the non-heating period for averagely 120 days, the reinjection water tem-perature is 20℃ and the natural recharge mode is adopted. This paper forecasts the dynamic field and temperature field characteris-tics of the study area under the conditions of the absence of lake water reinjection and the existence of water injection for 1 year and 5 years. The results show that increasing lake water reinjection can reduce heat reservoir pressure dropping rate and has no sig-nificant influence on the temperature field.
Keywords:Tianjin  geothermal resources  reinjection  simulation and predication
HTML  查看全文  查看/发表评论  下载PDF阅读器
您是本站第 4786339 位访问者
今日访问 6459 
版权所有@《地质通报》 编辑部
本系统由北京勤云科技发展有限公司设计
function PdfOpen(url) { var win="toolbar=no,location=no,directories=no,status=yes,menubar=yes,scrollbars=yes,resizable=yes"; window.open(url,"",win); } function openWin(url,w,h){ var win="toolbar=no,location=no,directories=no,status=no,menubar=no,scrollbars=yes,resizable=no,width=" + w + ",height=" + h; controlWindow=window.open(url,"",win); } &et=FC9DA7BF2F842A3B5C669F46499C8210610AA0CF75CEA7371201E5B84EFBAF11738A0B748420A0375B48D65F8E5962CE5545144A6EA83E314FAC60CCA9C1E3AC14AE0A7CEA1026E8A14245B9B120F51C0AAC7841B43A70069D95EC33B269B21E&pcid=E62459D214FD64A3C8082E4ED1ABABED5711027BBBDDD35B&cid=621CF755B1A341E5&jid=B6579C86F203B551EAEF6FF655601072&yid=FA004A8A4ED1540B&aid=&vid=&iid=5D311CA918CA9A03&sid=794F46304592E8E6&eid=D4D26E96843E8F48&fileno=20170813&flag=1&is_more=0"> var my_pcid="E62459D214FD64A3C8082E4ED1ABABED5711027BBBDDD35B"; var my_cid="621CF755B1A341E5"; var my_jid="B6579C86F203B551EAEF6FF655601072"; var my_yid="FA004A8A4ED1540B"; var my_aid="";